Xerox DocuPrint 96 Operator's Manual page 398

PROBLEM SOLVING TASKS
11-2
The Fault List screen appears. (See figure 11-1.)
Figure 11-1. Fault List screen
The Fault List screen displays any outstanding fault codes and
shows a mimic of the printer, with the area containing the masked
fault highlighted in light yellow.
Note the following:
•
For greatest printer productivity, clear any masked faults at your
earliest opportunity.
•
When the printer stops because of a fault, it is a good idea to
display the Fault List screen after clearing the fault to see if
there are any outstanding masked faults. Clear these masked
faults before continuing with the print job. Doing so will enhance
printer productivity.
•
When there is a fault that cannot be masked, that is, that
causes the printer to stop, the Fault icon (a dark yellow triangle
with an exclamation point inside) appears on the printer control
console and the Attention light flashes. The Fault screen
appears on the printer control console, highlighting (in dark
yellow) the area(s) of the printer containing the fault, and
instructions are given for clearing the fault.
•
If a fault exists in the system at the time that a masked fault
occurs, only the Fault icon appears on the printer control
console. Any masked fault condition messages still appear in
the message area of the printer control console.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE