HIP PRINTING TASKS
Abort a HIP print job
7-6
Use this task to abort a specific job or all jobs from the HIP job queue.
Note: You can abort only HIP jobs whose status is Receive or
Pending.
Abort Job task
Enter the following command:
HIP ABORT {ALL | job-id [, job-id ...]}
Table 7-1 lists each parameter and its description.
Table 7-1.
Parameter
ALL
[ job-id [, job-id ]]
HIP ABORT command parameters and
descriptions
Description
Causes all jobs in the job queue to abort.
One or more HIP job numbers you want to abort.
You can find the HIP job number through the HIP
Jobs Status task.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE