Xerox DocuPrint 96 Operator's Manual page 159

Sample
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Use this task to print a single page sample of the current job being
printed.
Note the following when sampling the current job:
•
The job may be running or suspended.
•
The job must be at least three pages in length for you to be able
to sample it.
•
The next available page is printed twice and the extra page is
sent to the sample tray.
To get a sample, you may also:
•
Press the <SAMPLE> key on the keyboard.
•
Press the Sample button on the printer control console.
Note: A print job must be in output processing in order to obtain a
sample print. Also, you may not print samples when the sample tray
is the output destination for a job, for example, when printing
transparencies or when ordered stock is being used in the job.
Sample task To print a sample of the current print job, enter the following
command:
SAMPLE
JOB CONTROL TASKS
4-11