Reset - Xerox DocuPrint 96 Operator's Manual

Reset

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
When the Reset task is used:
•
All print jobs are removed from the job queue.
•
Any pages in the printer paper path are sent to the selected
stacker bin.
•
All processing activity ceases, including accounting.
•
If your LPS is operating online to a host computer, all jobs in the
system need to be resent from the host.
Note: The Reset task should not be used if the Abort task can be
used instead.
•
If the system is idle when the Reset task is selected, a message
appears informing you that the system has been reset and is
ready for another request.
•
If the system is not idle, a message appears asking you to
confirm the clearing of the job queue.
Reset task Enter the following command:

RESET

If the system is idle when the Reset command is entered, a message
displays informing you that the system has been reset and is ready
for another request. If the system is not idle, the following messages
appear on the keyboard display:
RESET WILL CLEAR THE JOB QUEUE. DO YOU WANT TO
PROCEED?
(TYPE 'Y' FOR YES, OR 'N' FOR NO; ENTER = YES)
Press <Y> to clear the job queue; press <N> to cancel the RESET
command.
JOB CONTROL TASKS
4-3