Purge Feed; Lower Trays And Bins - Xerox DocuPrint 96 Operator's Manual

Laser printing system
Hide thumbs Also See for DocuPrint 96:
Table of Contents

Advertisement

STATUS AND PRINT TASKS

Purge feed

Purge Feed task

Lower trays and bins

Lower Trays and Bins task
8-10
Use the Purge Feed task to specify which feeder trays you want to
supply the LPS with purge sheets.
Note: In order to clean the photoreceptor properly following a fuser
area jam, one of the feeder trays you specify must contain paper at
least as long as the paper used in the current print job.
Note: Do not specify a tray containing ordered stock.
To specify trays for purge feeding, enter the following command:
PFEED [tray list ]
Table 8-4 lists the parameter and its description.
Table 8-4.
PFEED command parameter and description
Parameter
Description
tray list
The numbers of the trays you want the LPS to
use for purge sheets.
To display the currently assigned purge feed trays, enter the
following command:
PFEED
Use this task to lower tray and bin elevators from the keyboard
display.
Enter the following command:
UNLOAD { n | a }
Table 8-5 lists each parameter and its description.
Table 8-5.
UNLOAD command parameters and descriptions
Parameter
Description
n
The feeder tray.
a
The stacker bin.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 96mx

Table of Contents