Xerox DocuPrint 96 Operator's Manual page 166

ONLINE PRINTING TASKS
Start an online print job
Space
5-2
Use this task to begin printing an online job.
Start Job task To start printing an online job, enter the following command:
START [[ jde ][,[ jdl ][,,[ copies ][,FORM= form ]]]]
Table 5-1 lists each parameter and its description.
Table 5-1.
Parameter
START
jde
jdl
, (comma)
copies
FORM= form
Refer to the Xerox DocuPrint 96/DocuPrint 96MX LPS Operations
Reference for further information.
The Space task allows you to move forward a specified number of
pages within a report in order to begin printing at that point in the
report.
If you have already started the print job, do the following:
Step 1. Stop the print job.
Step 2. Perform the Space task.
Step 3. Continue the print job.
Space task Enter the following command:
SPACE n PAGES
n is the number of pages you want to space forward. It must be a
positive number.
START command parameters and descriptions
Description
Specifies the command, to be followed by any or
all of the specifications as needed.
The name or number of the job descriptor entry
which may be up to six characters in length.
The name or number of the job descriptor library
which contains the JDE task used. The name or
number may be up to six characters in length.
The comma replaces the multi/single report
mode parameter when giving the START
command online.
The requested number of prints for each report.
The name of the form to be used. The extension
.FRM is optional.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE