Type - Xerox DocuPrint 96 Operator's Manual

FILE CONTROL TASKS

TYPE

9-18
Use this command to display a source file without editing the file.
Logon level Levels 1 through 5.
Syntax TYPE [ disk-id ] file-id
Parameters Table 9-17 shows the syntax parameters of the TYPE command.
Table 9-17. Parameters of the TYPE command
Parameter
disk-id
file-id
Each source file has line numbers associated with its data records.
These line numbers are supplied by the editor during file creation.
Editable files created by the COPY TAPE READ command from
open-reel tape have line numbers added to them at the time the file
is created. Source files downloaded from the online subsystem
through HOSTCOPY must have line numbers added with the editor
(refer to the MERGE command).
Only the uppercase letters A to Z, and the digits 0 to 9 can be used
in source file names.
Description
Identifies the system disk (DP0:, DP1:, DP2:, or
DP3:) which contains the file-id to be displayed.
Refers to the name of a file and the file directory in
which it resides. The form used is file-name.file-
type as previously defined.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE