XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
•
Paper tray levels. The levels depicted indicate:
— Empty
— 1/4 ream
— 1/2 ream
— 3/4 ream
— 1 ream
— 2 reams
— 3 reams
— 4 reams
— Full.
•
Stacker bin state. The state can be one of the following:
— In Use. The current print job is stacking in the bin.
— Ready. The bin is ready to receive output.
— Not Available. For example, the bin is broken).
— Busy. The bin elevator is raising or lowering.
— Lowered. The bin elevator is down.
•
Stacker bin size. The size is either:
— None. The bin is empty and containers are not being used.
Any size output can be stacked in the bin.
— x by y. The size of paper or container and paper currently
stacked in the bin.
Note: When various sized paper is stacked in a bin, the
size displayed indicates the largest paper width and length.
•
Stacker bin levels. The levels depicted indicate:
— Empty
— 1 ream
— 2 reams
— 3 reams
— 4 reams
— Full.
•
Output bin mode. The mode is either:
— Auto. When the first bin is full, stacking automatically
switches to the next bin.
— Separate. The report switches to the next bin at the report
boundary.
Note: The Output Bin mode displays on the bin that is currently
in use.
STATUS AND PRINT TASKS
8-3