Xerox DocuPrint 96 Operator's Manual page 275

Configuring a finishing device
FCG (display the profile labels)
FCG (configure a finishing or feeding device)
FCG SHOW (check finishing or feeding device settings)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Use this task to configure a finishing or feeding device.
Use this command to display the profile labels in the FCG.LIB file.
Logon Level Levels 2 through 5.
Syntax FCG
Use this command to load into printer memory the personality profile
the LPS must use to communicate with the finishing device or bulk
feeder. The personality profile is an entry in a text file called
"FCG.LIB." Once this file is created, it is preserved across sysgens.
Logon Level Levels 2 through 5.
Syntax FCG { profile-label }
Parameters Table 8-11 shows the parameters used in FCG to configure a
finishing or feeding device.
Table 8-11. Parameters of the FCG (configure a finishing or
Parameter
profile-label
Use this command to check the settings for the finishing or feeding
devices configured for the LPS.
Logon level Levels 2 through 5.
Syntax FCG SHOW
Restrictions SHOW cannot be abbreviated to SHO.
feeding device) command
Description
Specifies the entry in the FCG.LIB file to be sent to
the printer.
STATUS AND PRINT TASKS
8-15