Xerox DocuPrint 96 Operator's Manual page 54

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS
Operator control panel
1/4 inch cartridge tape drive
1-4
The operator control panel allows you to power the printer on and off,
boot the operating system software, and switch the LPS between
remote and local operation. Figure 1-4 shows the operator control
panel.
Figure 1-4. Operator control panel
1 Power On switch
2 Power Off switch
3 Power On indicator
4 Boot switch
5 Local switch and indicator
6 Remote switch and indicator
The 1/4 inch cartridge tape drive, also referred to as QIC (quarter
inch cartridge), is used for performing sysgen, disk save and restore
(DSR), and file loading/backup for online system configuration.
(Refer to the "1/4 inch cartridge tape drive procedures" section of the
"Offline printing tasks" chapter for instructions on loading and
unloading cartridge tapes.)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE