STATUS AND PRINT TASKS
Ordered stock
Ordered Stock task
8-8
Ordered stock consists of paper arranged in a specific order in a
feeder tray so that it can be printed in a cycle. Prenumbered sheets
and tabs are two examples of ordered stock.
The Ordered Stock task allows you to reset the ordered stock
position in the feeder tray.
Enter the following command:
OSTK m , n
Table 8-3 lists each parameter and its description.
Table 8-3.
OSTK command parameters and descriptions
Parameter
Description
m
The number of the tray containing the ordered
stock.
n
The new position of the ordered stock.
For example:
1. You are printing a job using prenumbered sheets of paper,
numbered from 1-10, feeding from tray 3.
2. You remove some sheets from the top of the stack in tray 3.
3. The LPS expects the next sheet to be number 3, though it is, in
fact, number 6.
4. Use the OSTK command in the following way:
OSTK 3 6
The above command tells the LPS that page 6 is ready to be
printed from the ordered stock in tray 3
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE