Xerox DocuPrint 96 Operator's Manual page 352

MAINTENANCE TASKS
Cleaning precautions—READ BEFORE CLEANING
Cleaning procedures
Access to the tape path
10-18
Note the following:
•
The edges of the tape cleaner are extremely sharp. Observe
great care when cleaning them.
•
Avoid inhaling fumes from the cleaning fluids.
•
Keep the cleaning solution containers tightly closed when not in
use.
•
Use the cleaning solutions only in well-ventilated areas.
•
If you have sensitive skin, you may want to wear gloves when
using the cleaning solutions.
•
Avoid prolonged contact with the skin.
This section lists the steps to access and clean the tape path, and to
clean the exterior of the tape drive.
To access the tape path:
Step 1. Open the cover of the peripheral cabinet.
Step 2. Release the three turnbuckles on the tape path cover by turning them
counter clockwise (see figure 10-22).
Figure 10-22.Releasing the turnbuckles
Step 3. Raise the cover as far as it will go.
Step 4. Press the Reset button to open the tape loading door.
Step 5. Turn off the tape drive by pressing the Power switch off.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE