STATUS AND PRINT TASKS
FCG procedures
8-16
Use this task to:
•
Send the configuration values for a feeding or finishing device
to the printer
•
Display the current device configuration values.
Configure task
Table 8-12 shows the command to send feeding or finishing device
configurations to the printer.
Table 8-12. Parameters of the FCG SHOW (check finishing or
Parameter
FCG profile-label
profile-label
To display all profile labels for the feeding or finishing device, enter
the following command:
FCG
To display the current device configuration values, enter the following
command:
FCG SHOW
Note: SHOW cannot be abbreviated to SHO.
feeding device settings) command
Description
The name assigned to the feeding or finishing
device configuration.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE