Xerox DocuPrint 96 Operator's Manual page 310

FILE CONTROL TASKS
List tape or cartridge files
TAPE [CARTRIDGE TDn] LIST
9-16
The following explains the procedure for listing tape or cartridge files.
Use this command to display or to create a disk file of file-names and
sort them alphabetically or add leading or trailing strings to facilitate
future command file manipulation of that tape or cartridge.
Logon level Levels 1 through 5.
Syntax TAPE [CARTRIDGE | TD n ] LIST [,PRINT]/EX {[[/SORT, file-name
[. file-type ]] | /file-name [. file-type ],[ leading string ],[ trailing string ]]}
Parameters Table 9-15 shows the syntax parameters for creating tape or
cartridge file lists.
Table 9-15. Parameters of the TAPE [CARTRIDGE | TDn] LIST
Parameter
TAPE
CARTRIDGE
TD n
LIST[,PRINT]
/EX
/SORT
,file-name [file-
type]
/file-name [file-
type]
leading string
trailing string
command
Description
TAPE is TD0; CARTRIDGE is TD1.
Specifies a tape device number.
Lists the file-ids of the labeled tape, beginning at
the current tape position. If PRINT is omitted, the
tape directory is displayed.
Prints all the file characteristics of a given file id.
Note that when /EX is selected, the leading and
trailing strings are not allowed. If the /EX option is
not entered, only the file IDs are printed.
Alphabetically sorts a list of file names of the files
on tape. The number of files that can be sorted is
limited by the availability of dynamic memory.
When this limit is reached, the message FILE/
LIST TOO LONG.ONLY FIRST xxxx
FILENAMES WILL BE SORTED. is displayed.
Sort by file types for large disk or tape volumes.
Specifies the file created on disk that contains the
alphabetically sorted list of tape files. The default
file-type is .TMP.
Specifies the file, created on disk, which contains
a record for each file listed in the following order:
Lead str file-id Trailstr. The default file-type is
.TMP
A character string (except commas) that is added
before each file-name in the list that is created.
A character string (except commas) appended to
each file-name in the list that is created. The total
number of leading and trailing characters cannot
be greater than 50.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE