Xerox DocuPrint 96 Operator's Manual page 308

Laser printing system
Hide thumbs Also See for DocuPrint 96:
Table of Contents

Advertisement

FILE CONTROL TASKS
SCALE
9-14
Use this command to scale 300 spi fonts, forms, and logos to 600 spi
equivalents. To scale fonts and logos, SCALE doubles all positioning
metrics in the output file and employs the same set of interpolation
rules used by the ROS to render the 600 spi character bit maps. The
appearance of the fonts and logos produced by the SCALE and
printed at 600 spi is indistinguishable from the appearance of the
same unscaled 300 spi files interpolated by the ROS. Forms are
scaled by changing all internal references to font, logos, and images
in the form header to refer to FN6, LG6, IM6 entities.
Logon level
Levels 1 through 5.
Syntax
SCALE input-filename.file-type
[/a | /b | /o | /5]
Parameters
Table 9-14 shows the parameters of the SCALE command.
Table 9-14. Parameters of the SCALE command
Parameter
input-filename
filetype1
output-filename
filetype2
/b
/O
/A
[ output-filename.file-type
1
Description
Specifies the font (.FNT), form (.FRM) or logo
(.LGO) file to be converted to 600 spi.
Specifies the file type as .FNT, .FRM or .LGO.
Specifies the name for the new 600 spi file.
Specifies the file type as .FNT or .FN6, .FRM or
.FR6, .LGO or .LG6, .MSC or .TMP; usually "6"
is substituted for the last character of the
original file type.
Doubles the font or logo bitmaps instead of
using the interpolation formula to scale the
input file.
Overwrites the output filename without
prompting.
Overrides the escapement error message **
DiagChar NNN in XYZABC.FN6 exceeds
byte escape, set to 0.425 in ** if
the font is not used Interpress and justification
is not required. If the switch /A assign
escapement is added to the command line
(that is , SCALE XYZABC.FNT /A), SCALE
sets the width of the large characters to 255/
600 (.425) inches. Widths overridden in this
manner may yield "compressed" characters
when used in Interpress printing. Problem
characters will typically be in 36 point fonts and
above.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
]
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 96mx

Table of Contents