Problem Solving Tasks; Lps Problems; Fault Masking And The Printer Control Console - Xerox DocuPrint 96 Operator's Manual

LPS problems

Fault masking and the printer control console

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
11.

11Problem solving tasks

This chapter contains instructions for diagnosing and solving
common problems that may arise when operating the LPS. Also
included are instructions for placing a service call, when needed.
The following sections deal with LPS problems.
The Xerox DocuPrint 96/DocuPrint 96MX LPS allows you to continue
printing while certain faults or conditions exist in areas of the printer
not currently being used. The LPS does this by "masking" the fault or
condition and continuing to print the current job. For example, if you
are printing a report using feeder tray 1 and stacking into stacker bin
A, the LPS continues printing even if a jam exists in feeder tray 2 or
if stacker bin B is full. Whenever there is a masked fault or condition,
the Hint icon (a light yellow circle with an asterisk inside) appears on
the printer control console and the Attention light goes on. If a
condition is being masked, such as low dry ink, a message also
appears in line 3 of the message area of the printer control console.
The message is preceded by an asterisk. To display the area
containing the masked fault (for example, the location of the paper
jam), touch the Fault List icon on the printer control console.
11-1