Xerox DocuPrint 96 Operator's Manual page 126

SYSTEM CONTROL TASKS
System control tasks
Power on the LPS
3-2
The following sections contain instructions for performing specific
system control tasks.
Use this task to start the LPS:
Step 1. Press the Local button on the operator control panel (see figure 3-1,
unless otherwise instructed.
Figure 3-1. Local button on operator control panel
Step 2. Press the System Power On button on the operator control panel
(see figure 3-2).
Figure 3-2. System Power On button on operator control panel
The Power indicator lights and READY $ appears on the display.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE