Feeder Trays - Xerox DocuPrint 96 Operator's Manual

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS

Feeder trays

1-6
The feeder trays hold and convey paper and other materials (for
example, transparencies) used to produce printed output.
Figure 1-6. Xerox DocuPrint 96/DocuPrint 96MX feeder trays
and inverter feeder/stacker module
1 Processor feeder trays
2 Inverter feeder/stacker module (contains high capacity
feeder and stacker)
Two processor feeder trays are located in the main part of the printer.
•
The main tray (tray 1) holds 1100 sheets of 20 pound/75 gsm
paper.
•
The auxiliary tray (tray 2) holds 600 sheets of 20 pound/75 gsm
paper.
•
If configured, trays 1 and 2 can handle paper sized from 8 by 10
inches/203 by 254 mm to 9.05 by 14.02 inches/230 by 356 mm.
There is one high-capacity feeder (HCF) tray in the feeder/stacker
module (tray 3). The HCF tray is the primary paper supply for the
printer. Each tray can handle paper sized from 8 by 10 inches/203 by
254 mm to 14.33 by 17 inches/364 by 432 mm.
An elevator moves the tray up or down when it is in use. The HCF
trays have Paper Level switches which detect the position of the
elevator to determine the fullness of the tray. Paper Size switches
detect the size of the paper loaded in the trays.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE