Xerox DocuPrint 96 Operator's Manual page 158

JOB CONTROL TASKS
Stop input/output
Stop Input/Output task
Continue input/output
Continue Input/Output task
4-10
Use this task to stop input processing, output processing (printing),
or both.
•
To stop both input and output processing, you may also press
the <STOP> key on the keyboard.
•
To stop printing, you may also press the Stop button on the
printer control console.
Note: When running an online job, stopping output processing will
also stop input processing. When doing the same for an offline job,
the input processing continues.
Use this task as follows:
•
To stop both input processing and printing, enter the following
command:
STOP
•
To stop input processing, enter the following command:
STOP I
•
To stop printing, enter the following command:
STOP O
Use this task to resume interrupted input processing, printing, or
both.
Continue is also used:
•
To confirm that you have completed activities such as loading
paper
•
To resume operation of the LPS after a system report of a fault,
such as a paper jam.
Input and/or printing resume at the point where stopped.
•
To resume both input and output processing, you may also
press the <CONTINUE> key on the keyboard
•
To resume printing, you may also press the Continue button on
the printer control console.
Use this task as follows:
•
To resume both input processing and printing, enter the
following command:
CONTINUE
•
To resume input processing, enter the following command:
CONTINUE I
•
To resume printing, enter the following command:
CONTINUE O
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE