Adding fuser agent
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Warning: Fuser agent contains silicone, which can cause irritation
!
upon contact with the eyes. Be sure to wash your hands with soap
and water after you finish this procedure.
To add fuser agent:
Step 1.
Open the right and left doors of the printer and locate the fuser area
(see figure 10-9).
Figure 10-9. Fuser area
Step 2.
Place a drop cloth on the floor under the fuser area.
Step 3.
Grasp the green handle on the fuser drawer and pull it out until it
stops (see figure 10-10).
Figure 10-10.Opening the fuser drawer
MAINTENANCE TASKS
10-7