Space; Move - Xerox DocuPrint 96 Operator's Manual

OFFLINE PRINTING TASKS

Space

Move

6-28
The Space task allows you to print a specific job (or jobs) by spacing
over pages or reports on a tape.
To move forward, enter a positive number; to move backward, enter
a negative number.
If you have already started a print job:
Step 1. Stop the print job.
Step 2. Perform the Space task.
Step 3. Continue the print job.
Space task To space over pages within a report, enter the following command:
SPACE n PAGES
n is the number of pages.
To space over reports, enter the following command:
SPACE n REPORTS
n is the number of reports.
The Move task allows you to position a tape forward or backward a
specific number of files or blocks.
Note: After using the Move task, you must reset the system before
changing to another device.
Note: While the Move task is being processed, input stops and a
message appears telling you that the tape is being positioned. You
must press the Continue button to resume input processing of any
active jobs.
Move task Enter the following command:
MOVE n {files | blocks}
n is the number of files or blocks you want to move forward or
backward on the tape. A positive number positions you forward; a
negative number positions you backward.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE