Load A 1/2 Inch Cartridge - Xerox DocuPrint 96 Operator's Manual

OFFLINE PRINTING TASKS

Load a 1/2 inch cartridge

Cartridge tape precautions
6-16
Before loading a cartridge, ensure it is not damaged. A damaged
cartridge can prevent the tape from threading correctly and cause
damage to the tape drive. A cartridge should not be used if the:
•
Cartridge case is cracked or broken.
•
Leader block or leader block latch is broken.
•
File-protect selector is damaged.
•
Label is peeling off.
•
File protect sensor is damaged.
•
Cartridge case contains any liquid.
•
Cartridge has any other obvious damage.
•
Tape was wound completely out of the cartridge onto the
machine reel and then reattached to the cartridge reel.
If you have a damaged cartridge, substitute a back-up version of the
data from another cartridge.
Follow this procedure to load a cartridge into the 1/2 inch cartridge
tape drive.
Step 1. Hold the cartridge with the smooth side on top and the leader block
toward the drive (see figure 6-24).
Figure 6-25. Holding the 1/2 inch cartridge
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE