Xerox DocuPrint 96 Operator's Manual page 58

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS
High-capacity stacker bins
1-8
The Xerox DocuPrint 96/DocuPrint 96MX LPS contains a high-
capacity stacker (HCS) bin. Figure 1-8 shows the high-capacity
stacker bin with the purge tray.
Figure 1-8. HCS bin with purge tray
1 High capacity stacker
2 Purge tray
The HCS can hold 2500 sheets of 20 pound/75 gsm paper. The
paper can be stacked onto the bin platform, a container on top of the
bin platform, or a pallet without its container (for container sizes 11
by 17 inches or A3 only). The stacking capacity is approximately 100-
150 sheets less when stacking into a container. (Refer to table 9-1 for
information on available containers.)
It is also possible to select the level to which paper will be stacked in
the HCS. Refer to the "Status and print tasks" chapter for additional
information.
A stacking elevator maintains the paper at the proper level for
stacking and lowers the stack for unloading. There is an offset
mechanism that offsets printed sets toward the front or back of the
HCS bin. Each HCS bin has unlinked double doors to provide you
with easy, yet safe, access for unloading paper from the printer.
The HCS bin has a control panel consisting of buttons and indicators,
as shown in figure 1-9.
Figure 1-9. HCS bin control panel
1 Ready to Unload indicator
2 Please Wait indicator
3 Bin Unload button
4 In Use indicator
Ready to Unload indicator. When this indicator is lit, you can
remove printed sheets from the stacker bin.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE