Xerox DocuPrint 96 Operator's Manual page 136

SYSTEM CONTROL TASKS
Remote Terminal
3-12
4. NONE OF THE ABOVE. RETURN TO THE OPERATING
SYSTEM.
INDICATE SELECTION BY ENTERING NUMBER
If you select any option other than 1, you can continue using the LPS.
If you select option 1, the following messages appear:
SERVICE CALL PLACED.
WAITING FOR CE
1. REDISPLAY DISPATCH CODES
2. RETURN TO OPERATING SYSTEM
INDICATE SELECTION BY ENTERING NUMBER
Step 3. Select option 1 to see the dispatch codes, or select option 2 to
continue using the LPS.
Step 4. Ensure that you record the 6-digit dispatch code to report to the
service representative.
Note: In the U.S., the message CALL THE FIELD SERVICE
DISPATCHER AND REPORT THESE NUMBERS refers to the
National Customer Service Support Center. For non-U.S. areas,
contact your local service representative.
The remote terminal function is only available in conjunction with
Xerox Print Services Manager software. Please refer to the Xerox
DocuPrint 96/DocuPrint 96MX Installation Planning Guide for
hardware requirements for use of the remote terminal option.
Use this task to transfer control of the Xerox DocuPrint 96/
DocuPrint 96MX from the keyboard display to a remote device when
running DocuPrintServer (formerly XPSM) jobs.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE