Xerox DocuPrint 96 Operator's Manual page 349

Cleaning the terminal and the exterior surfaces of the system
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Sensor Q1164 To access sensor Q1164, open the top cover of the last feeder/
stacker module (the one containing the purge tray). See figure 10-20
for the location of the sensor.
Figure 10-20.Q1164 sensor location
Clean the display with a soft, lint-free cloth dampened with a glass or
lens and mirror cleaner. Do not spray the liquid directly onto the
display since it may cause damage.
Although the keyboard may seldom need to be cleaned, the exterior
surfaces of the system controller and printer should be cleaned daily,
if possible. Clean the keyboard and exterior surfaces with a mild
household detergent which has been poured or sprayed onto a cloth
lightly dampened with water. Do not saturate the cloth; just dampen
it. Liquids must not be allowed to drip onto anything electrical or
mechanical. For the same reason, never spray or pour the cleaner
directly onto the keyboard or the exterior surfaces of the
system.
MAINTENANCE TASKS
10-15