Cleaning Additional Sensors - Xerox DocuPrint 96 Operator's Manual

Cleaning additional sensors

Sensors Q1106 and Q1166
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
There are additional sensors which you should clean when directed
by the Xerox Customer Support Center personnel. To clean the
sensors, follow this procedure:
Step 1. Brush or wipe the sensor window lightly.
Step 2. Remove any paper dust present in the area.
Note: If the sensor is very dirty, you may use a small amount of
alcohol on a swab to clean it.
Caution: Do not use any abrasive materials or stronger solvents on
the sensor.
To access sensors Q1106 and Q1166, open the top cover of the
high-capacity stacker. See figure 10-18 for the location of the
sensors.
Figure 10-18.Q1106 and Q1166 sensor location
MAINTENANCE TASKS
10-13