Unloading a stacker bin
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
To unload a stacker bin:
Step 1.
Select a bin for unloading by pressing the Bin Unload button on the
bin control panel. Figure 2-12 shows the Bin Unload button. You can
also select the bin for unloading through the printer mimic of the
printer control console. Refer to the "Lower trays and bins" section of
the "Status and print tasks" chapter for instructions.
Figure 2-12. Bin Unload button
Step 2.
Once a bin is selected, the bin elevator lowers.
Note: Once the bin elevator lowers, the bin cannot be used
until it is emptied completely.
Step 3.
When the bin elevator stops in the down position, the Ready to
Unload indicator lights (see figure 2-13).
Figure 2-13. Ready to Unload indicator
PAPER FACTS
2-17