Xerox DocuPrint 96 Operator's Manual page 483

electronic publishing
embedded blanks
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
digitize To express or represent data in digital (binary) form so that it can be
processed electronically.
disk drive Device that can read or write magnetic media.
display Viewing device (monitor) that visually communicates system
warnings, status, and error messages and reflects operator
interaction with the system on a display.
DJDE Dynamic Job Descriptor Entry. Command within an input data stream
used to modify the printing environment dynamically.
DMR Command parameter that designates a Digital Equipment
Corporation host system.
document 1. Data medium and the data recorded on it, usually permanent,
which can be read by you or a computer. 2. Collection of information
pertaining to a specific subject or related subjects.
dot Unit of measurement representing a fraction of an inch, for example,
300 dots per inch (dpi). It may also be referred to as a picture element
(pixel) or spot.
download To copy files using communication lines from the host onto LPS
system disks.
dry ink Minute dry particles of resin and carbon black used to create images.
Dry ink can accept an electrical charge.
duplex printing Printing on both sides (front and back) of a page. See also simplex
printing.
EBCDIC Extended Binary Coded Decimal Interchange Code. Coded
character set consisting of 8-bit coded characters. It can
accommodate 256 characters.
edgemarking Use of graphic objects, usually lines or boxes, that bleed off the edge
of the physical page. See also physical page.
Integrated production of documents on demand, using digitally
stored documents, computerized composition, and electronic
printing systems.
elite Smallest size standard typewriter type: 12 characters per horizontal
inch. See also pica.
Blank spaces within a command line.
Ethernet Xerox local area network (LAN) that allows data to be transmitted by
cable from one device to another, enabling it to share the network.
GLOSSARY
GLOSSARY-7