Xerox DocuPrint 96 Operator's Manual page 432

PROBLEM SOLVING TASKS
Message display is blank
11-36
To solve this problem:
Step 1. Ensure the tape drive is receiving power from the main AC source.
Step 2. Ensure that the AC Power switch on the rear of the tape drive is on
(see figure 11-40).
Figure 11-40.18/36 Track AC power switch
AC Power switch
Step 3. Turn the Power switch OFF and then ON. (See figure 11-41).
Figure 11-41.DC power switch
DC
Power
switch
Step 4. If the display is still blank, call for service.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE