Xerox DocuPrint 96 Operator's Manual page 402

Laser printing system
Hide thumbs Also See for DocuPrint 96:
Table of Contents

Advertisement

PROBLEM SOLVING TASKS
Adjusting the decurler lever
11-6
To adjust the decurler lever:
Step 1.
Open the right door of the printer and locate the decurler lever (see
figure 11-5).
Figure 11-5. Decurler lever
Step 2.
If the print curl is +2 or more, move the green decurler lever to the
right.
Step 3.
If the print is -3 or more, move the green decurler lever to the left.
Step 4.
If the decurler adjustment does not eliminate the paper curl problem,
turn the paper stack over in the feeder tray.
Step 5.
If there is still a paper curl problem, perform steps 1 to 4 again.
Step 6.
If all else fails, insert paper from a new ream.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 96mx

Table of Contents