Xerox DocuPrint 96 Operator's Manual page 274

STATUS AND PRINT TASKS
Job status
Jobs Status task
8-14
Use this task to display information about jobs in the print queue. The
following information appears:
•
The print job queued for input (that is, processing).
•
Print job information for each job in the queue:
— Job number
— Customer job number
— Report number
— Report name
— Number of copies requested
— Total pages in the job
— Number of pages printed
— Number of pages printed
— Status of the job
— Status message number (either a blank if the print job
completed normally, an error message number, or "CS" if
the report is copy sensitive, that is, different copies of the
report contain different information).
Note: You can display the job status by pressing the <JOBS
STATUS> key.
To display jobs status, enter the following command:
JOBS
To display only reports in the print queue (that is, waiting to be
printed), enter the following command:
JOBS Q
To display up to 100 jobs with specific statuses, enter the following
command:
JOBS ALL {DONE | RESET | ABORT | RCVY | n }
DONE
Display jobs with the status "Done."
RESET
Display jobs with the status "Reset."
ABORT
Display jobs with the status "Aborted."
RCVY
Display jobs with the status "RCVY/NS."
n
The number of jobs for which you want status information displayed.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE