Replacing the dry ink waste container
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
To replace the dry ink waste container:
Step 1.
Open the right and left doors of the printer and locate the dry ink
waste container (see figure 10-5).
Figure 10-5. Dry ink waste container
Step 2.
Place a drop cloth on the floor under the dry ink waste container area.
Caution: To prevent dry ink spills, do not tip or tilt the waste
container.
Step 3.
Pull the full waste container out of the printer (see figure 10-6).
Figure 10-6. Removing the full waste container
Step 4.
Remove the cap from the top of the full waste container.
MAINTENANCE TASKS
10-5