Xerox DocuPrint 96 Operator's Manual page 304

FILE CONTROL TASKS
FILE
9-10
Use this command to display the file names in each disk file directory.
Specific file IDs within the catalog or the entire catalog may be
displayed.
Syntax FILE{[/EX][ disk-id ][ file-id ][, file-id ...]
[ disk-id ][ file-id ]/SORT, filename [. file-type ]
[ disk-id ][ file-id ]/ filename [. file-type ],[ leading string ],[ trailing string ]}
Parameters Table 9-9 shows the parameters of the FILE (display file list)
command.
Table 9-9.
Parameter
/EX
FILE NAME
XRX.IMG
KI1.IMG
KI2.IMG
FILE NAME
UNIT
FSIZE
RSIZE
FFBY
EOF
DISK ADDR
If the /EX option is not entered, only the file IDs are displayed. Note
that when /EX is selected, the leading and trailing strings are not
allowed.
Note: Extended file information is not displayed for licensed fonts
and logos or secured files.
Parameters of the FILE (display file list) command
Description
Displays all the file characteristics of a file id. The
display format is a title line identifying the
information in each column. Note that when /EX is
selected, the leading and trailing strings are not
displayed.
UNIT FSIZE RSIZE
2 6 512
2 8 512
2 21 512
A ten-character field indicating file name and file-
type.
The system disk (DP0:, DP1:, DP3:) on which the
file resides.
A ten-character decimal field indicating the
number of blocks allocated to the file.
A six-character decimal field indicating the
number of bytes in a record.
A six-character decimal filed indicating the first
free byte in the last block of the file.
A ten-character decimal field indicating the end-of-
file block number.
A ten-character octal field indicating the starting
address of the file on the disk.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
FFBY EOF DISK ADDR
512 6 472522
0 8 472530
0 21 472540