Xerox DocuPrint 96 Operator's Manual page 133

Set date/time
Set Date/Time task
Track console activity with Data Capture Utility (DCU)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Use this task to set the system date and time. The system must be
idle when you perform this task. (Idle means not printing, offline, and
not performing any non-printing tasks.)
Note: You must be at logon level 2 to use this task.
Note: The hours field is specified in military time, that is, 0—23,
with 0 signifying midnight.
Enter the following command:
SET TIME mm/dd/yy hh:mm:ss
You can separate the numbers in the date with a slash (/) or a dash
(—). You can use the numbers from 1 to 12 for the months or the
following abbreviations: JAN, FEB, MAR, APR, MAY, JUN, JUL,
AUG, SEP, OCT, NOV, DEC.
You can separate the numbers in the time with a colon (:). Entering
the seconds is optional; the system assumes :00 if you do not enter
the seconds.
Because the command is designed to allow you to change either the
time, the date, or both, you do not enter commas for missing
elements when setting only one of them. To change only the time, for
example, enter:
SET TIME 10:27
Use this task to track console activity. DCU creates a console log of
all LPS console entries and system console messages.
The following commands are used with the Data Capture Utility
(DCU):
•
DCU CAPTURE
Use this command to start or stop logging of all LPS console
entries and system console messages. This command creates
the log file which automatically records all LPS console entries
and system console messages for the specified number of
days. You can specify that a message display at the selected
interval to indicate logging of console entries. You can also
display or print the log file you create.
•
DCU DELETE
Use this command to delete all data logged in the file or to
delete all data through the specified date.
•
DCU EXIT
Use this command to stop DCU and unload the DCU
processing task from the system. This frees up the memory
used by DCU. To begin logging console data again, you must
recreate the log file using the DCU CAPTURE CONSOLE
command.
SYSTEM CONTROL TASKS
3-9