Attendant Add-On Console - NEC Xen IPK Features & Specifications Manual

Attendant Add-On Console

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
The Attendant Add-On Console functions in conjunction with a Multiline
Terminal programmed as an Attendant. This console provides access to a
maximum of 48 stations and/or outside lines. The Busy Lamp Field status is
shown as a red LED for each station or trunk. Trunks can include CO/PBX,
ISDN, DID and E&M Tie Lines. In addition, the Attendant Add-On Console
also has 12 function keys that can be used for attendant messaging, paging
access, or other undefined functions.
Terminal Type
Any terminal programmed as an Attendant Position.
Required Components
DCR-60-1A( ) or DCU-60-1A( ) Console.
To transfer a call:
1. Attendant answers an incoming CO/PBX call.
2. Press the DSS/BLF key for the desired station. The calling party is put
on Non-Exclusive Hold.
3. When the called party answers the Attendant call, the Attendant
announces the call and then presses
Console.
4. Go on-hook.
Attendant answers an incoming CO/PBX call.
5. Press the Attendant Add-On Console key for the desired station. The
calling party is put on Non-Exclusive Hold.
N
6. Press on the Add-On Console.
7. Go on-hook.
A-11
N
on the Attendant Add-On
- OR -
A11 – 43