NEC Xen IPK Features & Specifications Manual page 84

July 2003
SERVICE
CONDITIONS
74 – A18
Data Assignment
A maximum of two VRS(4)-U( ) ETU's, four channels per card, can be
used for Automated Attendant.
Each channel has 240 recording seconds that can be subdivided into
2, 4, 8, or 16 equal recording times.
A maximum of eight Automated Attendants can be assigned. Multiple
Automated Attendants can be assigned to one VRS(4)-U(
ETU channel.
Memory Block 1-4-02 (Automated Attendant Transfer Delayed Ringing
Time Selection) is not required to time out before incoming DID calls
can be answered by the Automated Attendant (can be set to No Limit).
Use Memory Block 1-4-08 (Automated Attendant PBR Timeout
Response Selection) to specify how a call is answered by the
Automated Attendant if DTMF tone is not received. If NORMAL Call is
specified (default), the system rings selected stations using Memory
Block 4-01[CO/PBX Ring Assignment (Day Mode)] or 4-02 [CO/PBX
Ring Assignment (Night Mode)]. When RELEAS is specified, the call is
dropped after a fixed time of 30 seconds.
Use Memory Block 1-4-09 (Automated Attendant PBR Start Time
Selection) to specify whether the PBR can receive DTMF signalling
while the Automated Attendant is sending the message (default: FR)
or after the message is finished (AF).
Use Memory Block 1-4-11 (Automated Attendant Message Day/Night
Mode Selection) to assign the Day/Night/Weekend mode greeting
messages to each Automated Attendant position.
Use Memory Block 1-4-13 (Automated Attendant Answer Delay Time
Assignment) to set the answering time (default: 4 seconds) between
when the incoming CO/PBX call rings and when it is answered. This
time affects the Day/Night/Weekend mode settings per Automated
Attendant.
Use Memory Block 1-4-16 (Automated Attendant Message Repeat
Selection) to assign the number of times a greeting message is
repeated (default: 1).
Use Memory Block 1-4-21 (Automated Attendant Extensions Number
Assignment) to specify the message that is played when a DID call is
received.
Use Memory Block 1-4-22 (Automated Attendant Direct Extension
Ring Assignment) to direct an AA Call to an extension or CAR Key
once the AA PBR timer has expired. Calls cannot be directed to a CAR
Key if 2 digit extension numbers are used.
Use Memory Block 1-8-07 [Class 0f Service (Attendant) Feature
Selection 1] Page 1 LK8 to Allow (default: LED On) or Deny (LED Off)
Attendant Positions to set/reset the Automated Attendant per trunk.
NEC Business Solutions Ltd
Automated Attendant
)