Intercom Function - NEC Xen IPK Features & Specifications Manual

Intercom Function

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
This feature allows all internal extensions to call each other without
accessing the telephony network.
There are three ways to generate an intercom call.
1. Using speaker key when Prime Line (refer to P5 of this document) or
Hot Line (refer to H6 of this document) is not set.
2. Using a Intercom key programmed into the Multiline Terminal.
T
3. Pressing followed by the
Terminal Type
Multiline Terminals
Single Line Telephone
Require Components
ESI(8)-U( ) ETU
ESIB(8)-U( ) ETU
ESIE(8)-U( ) ETU
SLI(4)-U( ) ETU
SLI(8)-U( ) ETU
On MLT and SLT without Prime Line or Hot Line Set:
1. Lift the handset or press
2. Receive intercom dial tone.
3. Dial extension number.
On MLT with Prime Line or Hot Line Set and Intercom key
programmed in one touch key:
1. Lift the handset or press
2. Press the pre-programmed Intercom key.
3. Receive intercom dial tone.
4. Dial extension number.
P
key on a Multiline Terminal.
P
.
P
.
I-5
I5 – 363