Speed Dial Stored Characters - NEC Xen IPK Features & Specifications Manual

Speed Dial Stored
Characters
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Each Multiline Terminal in the system may be assigned 20 Station Speed
Dial buffers. Depending on System Programming, if 1000 additional System
Speed Dial numbers are assigned, the stations do not have Station Speed
Dial. Station Speed Dial buffers may contain a maximum of 24 digits and 13
alphanumeric characters for storing a name associated with the number.
Terminal Type
All Multiline Terminals equipped with LCDs.
Required Components
None.
To program a Station Speed Dial buffer with stored characters:
T
1. Press .
Q
2. Press .
3. Dial the Station Speed Dial buffer number to be programmed
( ).
H0 II
~
4. Dial the Trunk or Trunk Group Access Code (maximum four digits).
5. Dial the desired telephone number.
U
6. Press , and enter a name using the Dial Pad character
Assignment table at the end of this feature.
T
7. Press .
To program a Feature Access key for Station Speed Dial with stored
characters:
T
1. Press .
Q
2. Press .
3. Dial the Station Speed Dial buffer number to be programmed
( ).
H0 II
~
4. Dial 0 .
5. Dial the Trunk or Trunk Group Access Code (maximum four digits).
S-11
S11 – 525