Recall With Station Identification - NEC Xen IPK Features & Specifications Manual

Recall With Station
Identification
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
When the call is not answered in a specified time, it recalls with Station
Identification. During the recall, the Multiline Terminal display shows the
station number that is recalling and the station that did not answer. This
feature applies to transferred, held, or camped-on calls.
Terminal Type
Any Multiline Terminal with LCD.
Required Components
None.
To use this feature from a Multiline Terminal with an LCD:
1. The Multiline Terminal user answers a CO/PBX incoming call.
N
2. Press , and dial the desired station number.
3. Go on-hook.
4. After the timeout, if the call has not been answered, the recall tone is
received and the CO/PBX line key LED intermittently winks. The
station number where the call was transferred to is indicated in
the LCD.
5. Press the intermittently winking line key, and go off-hook to answer
the recall.
Data Assignment
The recall timer is programmable in System Programming. A separate
recall timer is provided for Attendant Positions and stations (default:
60 seconds for both timers).
The ability to Ring Transfer is assigned as Allow or Deny in System
Programming (default Allow Ring Transfer).
System Programming allows station identification during a recall to be
shown or removed.
General
I-Hold or Call Park result indicates the station number that set
these features.
R-2
R2 – 483