Authorisation Code - NEC Xen IPK Features & Specifications Manual

Authorisation Code

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROECEDURES
Features and Specifications Manual
Authorisation Code permits a station to dial outside numbers that would
otherwise be restricted. When an access code plus Authorisation Code is
dialled, the station code restriction class temporarily changes to allow calls
when permitted by a new code restriction class.
The Authorisation Code can be verified or unverified based on class of
service and is assigned in the Forced/Verified Account Code table (these
share the same table).
The Authorisation/Account Code is part of the Station Message Detail
Recording (SMDR) call record.
Terminal Type
All stations.
Required Components
None.
To enter Forced Account Code/Authorisation Code from any Station:
1. Lift the handset or press
2. Dial Forced Account Code/Authorisation Code Access Code _______
(not set at default).
3. Dial the Account Code.
4. Dial the trunk access code and the outside number.
To program Forced Account Code/Authorisation Code from
Attendant position:
1. Lift the Handset or press
2. Dial Forced Account Code/Authorisation Code Programming Access
Code _______ (not set at default).
3. Dial the Forced
(001~500).
4. Dial the Account Code (default: 10 digits).
P
.
P
.
Account Code/Authorisation
A-16
Code Number
A16 – 61