Headset Connection (Built In) - NEC Xen IPK Features & Specifications Manual

Headset Connection
(Built In)
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
RELATED
FEATURES LIST
Features and Specifications Manual
A headset can be connected directly to a D
Multiline Terminal. This eliminates the need for an external headset switch.
In addition, a headset ON/OFF key can be assigned to the terminal to allow
easy operation of the headset.
Terminal Type
All Multiline Terminals.
Required Components
None.
To make a call:
1. Press the headset ON/OFF key.
2. Dial the desired number and talk.
To end a call:
1. At the end of a conversation, press the headset ON/OFF key.
2. Call is disconnected.
General
This feature works with several compatible capsule-only type
headsets.
Note: Capsule-only type headsets do not require external power. The
Multiline Terminal provides a built-in headset amplifier and volume
control.
The headset ON/OFF Feature Access key must be programmed in
System Programming.
Feature
Number
F-1 Feature Access – User Programmable
H-4
term
Series i or DTU-type
Feature Name
H4 – 345