Pc Programming - NEC Xen IPK Features & Specifications Manual

PC Programming

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
RELATED
FEATURES LIST
Features and Specifications Manual
The MIFM-U( ) ETU and Maintenance Access Terminal (MAT) software
allows the system to be programmed from a personal computer (PC).
System Data can be transferred to/from a diskette for backup of system
data. MAT PC programming software also allows the user to print station
designation strips to shorten installation time. End users can use the
Customer Administration Terminal (CAT) PC programming software to
program several features for their Multiline Terminals such as: Line Key
Assignment, Telephone Names, Zone Paging Groups, or various timers.
Terminal Type
Not applicable.
Required Components
MIFM-U( ) ETU
Pentium PC with Windows 95 or higher to run MAT PC programming
Refer to the Xen IPK System Programming Manual for PC
programming instructions.
The MIFM-U( ) ETU provides the RS-232C connector for connection
of a PC or a modem
PC Specifications:
Pentium PC
Windows 95 or higher
At least 13MB of free hard disk space
Unused PC serial communications port
MNP Class 4 or V.42 bis modem (if remote programming is
required).
Feature
Number
R-4 Remote Programming
P-2
Feature Name
P2 – 453