NEC Xen IPK Features & Specifications Manual page 431

Xen IPK
SERVICE
CONDITIONS
Features and Specifications Manual
PS AUTHORIZATION
term
The D Drover user can confirm the identity to prevent an unauthorized
term
D Drover from accessing the system. Identity is confirmed between the
term
system and D Drover by checking the unique key information of the
term
D Drover.
PS LOCATION REGISTRATION
The system can supervise the location of each D
termination after receiving the location registration request.
RADIO CHANNEL CHANGEOVER
Speech quality and interference are monitored. When the quality is poor or
interference makes communication difficult, automatic changeover to
another channel improves the speech quality and eliminates interference.
SPEECH ENCRYPTION
A call is protected from being tapped.
SPEED DIAL
term
The D Drover user can dial frequently called numbers using 2-digit
abbreviated call codes.
VOICE MAIL INDICATION
When a message is mailed to the D
displayed on its LCD along with a short ring tone.
Data Assignment
PHS handsets can be assigned to receive internal calls with Voice or
Tone signalling.
The PS handsets must be allocated extension numbers from the
systems internal numbering plan.
Ringing line preference can be assigned to PS handset ports.
Function numbers 083 and 084 must be assigned to Access Codes
(not set in default).
DIT/ANA can be assigned to PHS handsets.
The PS handsets must be allocated port numbers in blocks of 4.
These form part of the systems total port capacity.
The tone presented to a caller when the PHS handset is out of
the coverage area can be assigned as either Busy Tone or Ring
Back Tone.
If the PHS phone is set with CFBNA and is turned off or Out of Area:
When MB1-2-30 = 00, call goes to the Personal VM Greeting
Message after the MB1-2-22 timer.
When MB1-2-30 = XX sec, call goes to the Opening Greeting
Message of VM after the 1-2-30 timer.
Features and Specifications Manual
term
Drover and allow call
term
Drover, the envelope icon is
M6 – 421