Automatic Redial - NEC Xen IPK Features & Specifications Manual

Automatic Redial

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
The Automatic Redial feature simplifies repetitive Dialling to a busy or
unanswered outgoing call. When receiving a busy tone or no answer while
attempting to make a CO/PBX call, the system periodically redials the party
number while the station user monitors the call for completion.
Terminal Type
All terminals.
Required Components
None.
To set while receiving a busy tone or no answer on an outside call:
1. If using the handset, press
T
2. Press .
Q
3. Press .
4. The call is repeated automatically (default: 2 times).
5. Lift the handset to respond when the called party answers. If this is not
done, the call will be disconnected when the next redial cycle starts.
To cancel Automatic Redial:
1. Lift the handset, then restore handset, or press
Automatic Redial is cancelled automatically when the specified
number of redials (default: 2 redials) are completed.
A-25
P
and restore the handset.
P
- OR -
.
A25 – 103