NEC Xen IPK Features & Specifications Manual page 30

July 2003
SERVICE
CONDITIONS
20 – A3
To use this feature with Scrolling Directories:
V
1. Press the
speed dialling.
V
2. Press the
listed in the directory.
Press a dial pad key (to select the first letter of the name or number of
the desired speed dial buffer) and dial
3. To dial the number press
4. Enter the Account Code.
Data Assignment
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
Selection 1] Page 2 LK8 to Allow (default LED On) or Deny (LED off)
Attendant Positions to program Forced Account Codes.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 5 LK1 to Allow (LED On) or Deny (default: LED Off)
Account Code Forced/Verified.
Use Memory Block 1-8-27 (Forced Account Code Length Assignment)
to assign the number of digits for Account Codes system-wide. One to
13 digits can be assigned; default is 4 digits.
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify the
necessary MIFM-U( ) ETU.
(SYS. or STA softkey) to designate system or station
(UP or DOWN softkey) to view the names/numbers
- OR -
P
or lift the handset.
NEC Business Solutions Ltd
J
.
Account Code - Forced/Verified