Preset Dialling - NEC Xen IPK Features & Specifications Manual

Preset Dialling

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Preset Dialling feature enables a Multiline Terminal user to originate an
outgoing call by predialling digits on the keypad. After dialling the
number, the user can go off-hook, press the Speaker key, or press a line
key to make the call.
Terminal Type
Any Multiline Terminal.
Required Components
None.
To use this feature from a Multiline Terminal:
1. Dial the telephone number using the keypad.
2. Go off-hook, or press
CO line key.
Data Assignment
This feature is assigned in the class of service assignment.
Caller ID/Preset dial outgoing CO Selection must be assigned.
General
No confirmation tone is heard while dialling.
When a digit is not dialled within 10 seconds, this feature is
automatically cancelled.
Pauses cannot be entered while dialling.
A maximum of 24 digits can be displayed.
A call originating using this feature is cancelled when the Redial key,
Hold key, Transfer key or Recall key is pressed.
The Least Cost Routing feature (LCR) is in effect when using
Preset Dialling.
P
(if prime line set for outside line), or press
P-5
P5 – 459