NEC Xen IPK Features & Specifications Manual page 428

July 2003
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Trunk-to-Trunk Group Assignment
+BCT
¶
Access Code (1-, 2-, or 3-Digit) Assignment
+BA
418 – M5
General
Dial Access is provided only on systems registered as Multifunction.
At default, CO/PBX/ISDN lines 01~ 08 are assigned in Trunk Group 1,
all Tie lines are assigned in Trunk group 2, and all additional CO/PBX/
ISDN lines and DID lines are not assigned to a Trunk group.
The system provides for 32 Trunk groups. Any number of trunks, up to
64, can be in a Trunk group.
Trunks can be assigned to any or all Tenant groups.
Various features such as Code Restriction (outgoing), LCR, and Route
Advance Block are based on Trunk groups.
Trunk groups can be assigned to a Flexible Line key as a Pooled
Line (outgoing).
System Data Name
NEC Business Solutions Ltd
Memory
Function
Block
3-03
1-1-46/47/
101 ~ 132
48
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
Multiple Trunk Groups