Flexible Line Assignment - NEC Xen IPK Features & Specifications Manual

Flexible Line Assignment

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Each Multiline Terminal has complete flexibility of line key assignments to
meet individual needs. Functions can be programmed on Flexible Line
Keys, including DSS numbers and a variety of Feature Access Codes to
simplify the use of these functions. Outside line appearances and
Secondary Incoming Extensions can also be assigned to Flexible Line keys.
Terminal Type
All Multiline Terminals.
Required Components
None.
Not applicable.
Data Assignment
Flexible Line key assignment is done in System Programming.
Memory Block 4-50 (Multiline Terminal Type Selection) to assign a 32-
button terminal with 16 (default) or 24 line keys.
General
Each Flexible Line key can be assigned one of the following
10 options:
1. Outside Lines (01~64)
2. Trunk Groups (01~32)
3. Route Advance Blocks (01~32)
4. Secondary Incoming Extensions (01~120)
5. Call Appearance keys (for Groups 00~47, Locations 01~24)
6. Feature Access keys (01~16)
Applicable for tenant mode and telephone mode.
7. MIC ON/OFF key
8. Headset ON/OFF key
9. Call Arrival Key (05~120)
F-2
F2 – 321