NEC Xen IPK Features & Specifications Manual page 411

Xen IPK
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Card Interface Slot Assignment
+BS
¶
Line Key Selection for Telephone Mode
+BTM
¶
Class of Service (Station) Feature Selection 2
+BTS
When the system is at default this Memory Block must be programmed for the feature to be used.
Features and Specifications Manual
If DND, Call Forward - All Call, or Station Outgoing Lockout is set
during Live Monitoring Mode, the Live Monitoring mode is cancelled. If
required, a station user must set up Live Monitoring mode after setting
Call Forward - All Call.
Live Monitoring calls cannot be picked up by Call Pickup feature.
General
Visual indications for Live Monitoring line key LED include the
following.
Red flash
Red steady
Green steady When Live Monitoring is playing through
When the Live Monitoring key is assigned on a One-Touch or Feature-
Access key, the key toggles Live Monitoring on/off.
When multiple calls are recording to the same mailbox, user can Live
Monitor the first call only.
If you press
Access key, Live Monitoring is cancelled and the function of the key
you pressed is activated.
Live Monitoring can be turned ON or OFF using the personal settings
when using Softkeys.
Automatic Mode and Manual Mode for Live Monitoring can be toggled
between settings using Softkeys.
System Data Name
Features and Specifications Manual
Setting up Live Monitoring Mode
In Live Monitoring Mode (Station is available to
receive Live Monitoring)
Multiline Terminal
T R P
, ,
Memory
Block
7-1
4-12
1-8-08
O
or key, or a Line/Feature
1-8-07
Attendant
Function
Page-Line
Key
1-8-08
Station
Page-Line
Key
5-6
L4 – 401