NEC Xen IPK Features & Specifications Manual page 162

July 2003
SERVICE
CONDITIONS
152 – C6
Manual Operation:
For Multiline Terminals without automatic Caller ID display but which have
an appropriate class of service assigned, the following key sequences will
also display Caller ID indication: Feature key + CO key, Feature key + CAR
key, or Feature key + Answer key.
Data Assignment:
Caller ID Indication (Analogue Trunks)
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify the
COID(4)-U( ), COID(8)-U( ), COID(4)-U( ) or MIFM-U( ) ETU.
Use Memory Block 1-1-78 (Caller ID Display Assignment for System
Mode) to assign up to 15 Multiline Display Terminals to display Caller
ID indication for incoming calls.
Use Memory Block 4-49 (Caller ID Display for CAR Key Assignment)
to assign one Multiline Terminal per CAR Key to display Caller ID
indication for incoming calls.
Use Memory Block 3-44 (Caller ID Display Assignment for CO/
PBX Line) to assign the Caller ID Display for normal incoming CO/
PBX calls.
Use Memory Block 3-71 (Caller Name Display Assignment) to specify
whether the network name or speed dial name match is to
be displayed.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 4 LK3 to Allow (LED On) or Deny (default: LED Off)
Caller ID.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 4 LK4 to Allow (LED On) Caller ID Number display
or Deny (default: LED Off) to display the Caller ID Name, when Name
and Number are received.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 5 LK7 to Allow (LED On) or Deny (default: LED Off)
to display on two rows of the MLT. Both the name and number must be
received from the network. Page 4 LK4 selects the position of the
name or number on the Display for stations assigned to the Class of
Service. When Page 4 LK4 is On, the number is displayed on the top
line of the display. When Page 4 LK4 is Off, the name is displayed on
the top line of the display.
Use Memory Block 4-17 (Station to Class of Service Feature
Assignment) to make each station Class of Service Assignment.
Use Memory Block 4-01 [CO/PBX Ring Assignment (Day Mode)] or 4-
02 [CO/PBX Ring Assignment (Night Mode)] to make the CO/PBX
ringing assignments.
NEC Business Solutions Ltd
Caller ID - Incoming